Can you Paint Over Artex Ceilings? (Here’s How)

In the 1970s and 1980s, Artex was all the rage. Many people covered their ceilings with the textured material, thinking it would add character to their homes. However, times have changed, and many people now want to eliminate Artex ceilings. But can you paint over Artex ceilings?

The short answer is yes. You can paint over Artex ceilings. However, there are a few things you need to keep in mind. First, you must make sure the surface is clean and free of any dust or debris. You should also prime the surface before painting. This will help the paint stick to the artex and ensure a smooth finish. Finally, make sure you use high-quality paint that is designed for ceilings.

In this article, we’ll take a closer look at what artex. We’ll also provide some tips on how to do it correctly. So if you’re thinking of giving your home a makeover, keep reading!

What is Artex Ceiling?

Artex is a textured ceiling material popular in the 1970s and 1980s. It is made of a thick, fibrous material applied to the ceiling in a thin layer. The material is then scored or stamped with a pattern to create the desired texture.

While Artex ceilings were once popular, they are now becoming increasingly unpopular. Many people now want to get rid of their Artex ceilings and replace them with a smooth, painted surface.

What Paint Should You Use for Artex Ceilings?

If you’re planning to paint over your Artex ceiling, you should use high-quality paint specifically designed for roofs. There are a few different types of paint that you can choose from:

Acrylic: This type of paint is water-based and typically comes in either a flat or eggshell finish. It is a good option for ceilings, as it is durable and easy to apply.

Latex: This type of paint is also water-based, and it comes in a variety of finishes, including matte, satin, and gloss. It is a good choice for ceilings, as it is durable and easy to clean.

Enamel: This type of paint is oil-based and comes in various finishes, including gloss, semi-gloss, and flat. It is a good choice for ceilings, as it is durable and can be used in high traffic areas.

Before you start painting, you should always test the paint on a small ceiling area to ensure it is the right colour and finish.

What Roller Should You Use for Artex Ceilings?

When painting an Artex ceiling, you should use a roller with a short nap. This will help ensure that the paint is applied evenly and create a smooth finish.

Generally, it is best to start in the middle of the ceiling and work your way outwards. You should also avoid painting over any ridges or seams, as this will create a streaky finish.

In addition, you should always use a ladder when painting a ceiling, as it is difficult to reach the top of the ceiling without one.

See also  Can you Paint Over Wet Wood? (Here's How) - Complete Guide

Finally, be sure to keep a close eye on the paint as it dries. If it starts to drip or run, you will need to fix it before it dries completely.

How to Paint an Artex Ceiling

Once you’ve chosen the right paint, it’s time to start painting your Artex ceiling. Here are steps that you should follow to paint it correctly:

Step 1: Clean the ceiling.

Make sure the surface is clean and free of any dust or debris.

Step 2: Prime the surface.

Apply a coat of primer to the surface before painting. This will help the paint stick to the artex and ensure a smooth finish.

Step 3: Paint the ceiling.

Apply a thin coat of paint to the ceiling. Be sure to use a brush or roller that is designed for ceilings.

Step 4: Let the paint dry.

Allow the paint to dry completely before moving on to the next step.

Step 5: Apply a second coat of paint.

If you want a thicker finish, apply a second coat of paint. Be sure to allow the paint to dry completely between coats.

Step 6: Seal the finish.

Once the paint has dried, apply a coat of sealant to the surface to protect it from moisture and fading.

Important Considerations When Painting Artex Ceilings

Before you start painting your Artex ceiling, there are a few things that you should keep in mind:

  • The paint may take a while to dry completely, so be patient.
  • If the paint starts to drip or run, fix it immediately.
  • Be sure to keep a close eye on the paint as it dries and fixes any problems that may occur.
  • It is important to apply the paint in thin layers to achieve a smooth finish.
  • Start in the middle of the ceiling and work your way outwards.
  • Avoid painting over any ridges or seams.
  • Use a ladder when painting a ceiling.
  • If you’re not happy with the results, you can always paint over the paint job later.

How to Remove Artex Ceiling

If you want to remove your Artex ceiling, you can use a steamer. This will soften the material and allow you to scrape it off of the ceiling.

Be sure to wear a mask and goggles while removing the Artex, as it can be dusty and dangerous.

Alternatively, you can also use a heat gun to remove the Artex. This will also soften the material and allow you to scrape it off the ceiling.

Again, be sure to wear a mask and goggles while removing the Artex, as it can be dusty and dangerous.

Can You Roll On Artex?

The answer is, it depends. If you are using water-based paint, then you can roll it on. However, if you are using oil-based paint, you should not roll it on. Instead, you should use a brush or a roller with a short nap.

What Is The Best Paint Roller For A Textured Ceiling??

When painting a textured ceiling, you should use a roller with a short nap. This will help ensure that the paint is applied evenly and create a smooth finish.

See also  Can you Paint Vinyl doors? Here's How (Complete Guide)

What Is The Best Way To Paint Artex?

The best way to paint Artex is by using a brush or a roller designed for ceilings. You should start in the middle of the ceiling and work your way outwards. You should also avoid painting over any ridges or seams, as this will create a streaky finish. In addition, you should always use a ladder when painting a ceiling.

How Do You Dispose Of Old Artex?

The best way to dispose of old Artex is by using a steamer. This will soften the material and allow you to scrape it off of the ceiling. Be sure to wear a mask and goggles while removing the Artex, as it can be dusty and dangerous. Alternatively, you can also use a heat gun to remove the Artex.

This will also soften the material and allow you to scrape it off the ceiling. Again, be sure to wear a mask and goggles while removing the Artex, as it can be dusty and dangerous.

How do you clean an Artex ceiling before painting?

The best way to clean an Artex ceiling before painting is by using a steamer. This will soften the material and allow you to scrape it off of the ceiling.

How can I make my Artex ceiling look nice?

The best way to make your Artex ceiling look nice is by using a brush or a roller designed for ceilings. You should start in the middle of the ceiling and work your way outwards. You should also avoid painting over any ridges or seams, as this will create a streaky finish.

Is it safe to paint over Artex?

The answer is, it depends. If you are using water-based paint, you can paint over the Artex. However, if you are using oil-based paint, you should not paint over the Artex. Instead, you should use a brush or a roller with a short nap.

Can you paint over asbestos Artex?

The answer is, it depends. If you use water-based paint, you can paint over the asbestos Artex. However, if you use oil-based paint, you should not paint over the asbestos Artex. Instead, you should use a brush or a roller with a short nap.

Related Articles