How to Paint ATV Plastic Fenders? Complete Guide

There comes a time in the life of every ATV owner when they have to paint the plastic fenders. Maybe you’ve been trail riding and they’ve taken a beating, or maybe you’re just looking to give your machine a new look.

Whatever the reason, painting your ATV’s plastic fenders is a pretty simple process – as long as you know what you’re doing. In this guide, we’ll walk you through the steps necessary to get great results with minimal hassle. Let’s get started!

What is ATV plastic fender?

An ATV plastic fender is a type of fender made out of plastic that is designed to be used on an all-terrain vehicle. These fenders are typically made out of a tough and durable plastic material, such as polyethylene, that can withstand the rigors of off-road riding. Plastic fenders offer many benefits over traditional metal fenders, such as being much lighter in weight, more resistant to corrosion, and more flexible.

Benefits of Using ATV Plastic Fender

1. Weight savings

One of the main benefits of using plastic fenders on an ATV is the weight savings. Plastic fenders are typically 60-70% lighter than their steel counterparts, which can make a significant difference when riding in rough terrain. The lighter weight also makes it easier to maneuver the ATV, especially when going up and down hills.

2. More resistant to corrosion

Another benefit of plastic fenders is that they are more resistant to corrosion. This is because the plastic material does not rust like metal does. This means that your fenders will last longer and look better over time.

3. More flexible

Finally, plastic fenders are much more flexible than metal ones. This means that they will conform to the contours of your ATV better, providing a more secure fit. This can be especially useful if you ride in mud or water often, as the flexibility of the plastic will allow the fender to flex without breaking.

Can you paint ATV plastic fender?

Yes, you can paint ATV plastic fenders. You will need to use a plastic primer and then a plastic-safe paint. Be sure to follow the instructions on the paint can for the best results.

Generally, it is best to paint ATV plastic fenders when they are off the vehicle. This will allow you to get a better coat and avoid any drips or runs.

Additionally, you can use a vinyl wrap to change the color of your ATV fenders. This is a less permanent option, but it will give you a wide range of colors to choose from.

Is painting ATV plastic fender a good idea?

Many people enjoy customizing their ATVs, and one popular way to do this is by painting the plastic fenders. While this can certainly give your ATV a unique look, there are a few things to consider before you decide to paint your fenders.

Wrong type of paint

For one, the type of paint you use is important. Some paints are not meant to be used on plastic, and using the wrong type of paint could cause it to peel or chip over time. Make sure you use a paint that is specifically designed for plastic surfaces.

Void any warranty

Another thing to keep in mind is that painting your fenders will likely void any warranty you have on your ATV. If you decide to go ahead with it anyway, be sure to prep the surfaces well and use a high-quality paint for the best results.

Permanent change

Additionally, keep in mind that painting your ATV fenders is a bit of a permanent change. Once the paint is on, it can be very difficult to remove it without damaging the plastic beneath. So, if you’re not sure you want to commit to a painted look, you may want to consider some other options for customizing your ATV.

Perfectly safe

Generally speaking, painting ATV plastic fenders is a perfectly safe and acceptable way to customize your vehicle. Just be sure to do your research beforehand and use the proper type of paint for best results.

What Type of paint can be used on ATV plastic fender?

There are a few types of paint that can be used on ATV plastic fenders, but the best type to use is a vinyl-based paint. This type of paint will adhere well to the plastic and will not chip or peel easily. You can find vinyl-based paints at most hardware stores or online.

Generally speaking, any paint that is made for plastic will work on an ATV fender. However, some paints are better than others. For example, acrylic paint is a good choice because it dries quickly and is very durable. Enamel paint is also a good choice, but it can take longer to dry and may not be as durable as acrylic paint.

Additionally, you can also use spray paint specifically made for plastic. This type of paint is easy to apply and dries quickly. However, it is not as durable as other types of paint and may not last as long.

Should you Sandblast ATV plastic fender before painting?

You should sandblast ATV plastic fenders before painting them to ensure that the paint will adhere properly. Sandblasting will remove any dirt, grime or other contaminants that could prevent the paint from bonding to the fender. It will also roughen up the surface of the fender so that the paint can grip it better. If you don’t sandblast the fender first, there’s a good chance that the paint will peel or chip off over time.

See also  How to Make DIY Glow in the Dark Paint? Tips & Ideas (Easy Guide)

Generally speaking, you should always sandblast any surface that you’re going to paint. This is especially true for plastic surfaces, which can be very difficult to paint without proper preparation. Sandblasting will make the job much easier and will produce a better-looking finish.

Additionally, if you’re going to be using a powdercoat finish, sandblasting is absolutely essential. Powdercoat won’t adhere properly to a smooth, glossy surface, so you need to roughen it up first with sandblasting. Otherwise, the powdercoat will eventually peel or chip off.

How to paint ATV plastic fender: Step by step guide

Here is a detailed guide on how to paint an ATV plastic fender. This guide includes what materials you will need, the necessary preparation, as well as tips on painting and finishing the project.

1. Gather your materials. You will need: a can of plastic primer, a can of plastic paint, painters tape, sandpaper, and a utility knife.

2. Prepare the surface. Clean the surface of the fender with a mild soap and water solution. Once it is clean, dry it completely. Then, use the sandpaper to rough up the surface of the fender. This will help the primer and paint to adhere better.

3. Prime the fender. Apply a thin layer of primer to the fender, using even strokes. Be sure to follow the instructions on your can of primer for best results. Let the primer dry completely before moving on to the next step.

4. Paint the fender. Apply a thin layer of paint to the fender, using even strokes. Be sure to follow the instructions on your can of paint for best results. Let the paint dry completely before moving on to the next step.

5. Finish up. Remove the painters tape and utility knife. Your newly painted ATV fender is now complete!

Common mistakes while painting ATV plastic fender

1. Painting over dirt and grime – Before painting your ATV’s plastic fenders, be sure to thoroughly clean them. Any dirt or grime left on the surface will show through the new paint job.

2. Not using proper prep materials – When prepping your fenders for painting, be sure to use sandpaper designed for plastic. Regular sandpaper will quickly clog up and become ineffective.

3. Applying too thick of a coat – It’s important to apply thin, even coats when painting plastic fenders. Thick coats are more likely to run and can also result in an uneven finish.

4. Not allowing enough time for the paint to dry – Be patient and allow each coat of paint to dry completely before moving on to the next. Trying to hurry the process will only result in a poor-quality paint job.

Can you Hydro Dip ATV Plastics?

Yes, you can hydro dip ATV plastics. This process can give your ATV a unique and custom look that is sure to turn heads when you’re out on the trails. Hydro dipping involves using a water-based film to transfer a design onto your plastics.

The film adheres to the plastic and then the excess is removed, leaving behind the design. This process can be used on a variety of ATV plastics, including fenders, gas tanks, and more. If you’re looking to add some personality to your ride, hydro dipping is a great option.

Additionally, hydro dipping is a relatively simple process that can be done at home with the right supplies. So, if you’re feeling DIY-inclined, give it a try!

How do you keep ATV plastic from fading?

ATV plastic can fade over time due to exposure to the sun and other elements. There are a few things you can do to help keep your ATV plastic from fading:

  1. Wash your ATV regularly with soap and water, and dry it thoroughly afterwards.
  2. Apply a UV protectant to your ATV plastic. This will help to keep the sun from damaging the plastic.
  3. Store your ATV in a covered area when not in use. This will help to protect it from the elements.

If you follow these tips, you can help keep your ATV plastic from fading.

How do I shine my ATV plastic?

You can use a variety of materials to clean and polish your ATV plastic, including:

  • A mild soap and water solution
  • A commercial plastic cleaner/polish
  • A mixture of vinegar and water
  • A mixture of olive oil and lemon juice

To clean your ATV plastic with a mild soap and water solution, simply mix a small amount of soap with water in a bowl or bucket. Use a clean cloth to wipe down the plastic, being sure to get into all the nooks and crannies. Rinse the soap off with clean water and dry the plastic with a towel.

Polish your ATV plastic

To polish your ATV plastic, you can use either a commercial plastic cleaner/polish or a homemade mixture of vinegar and water. If using a commercial cleaner, simply follow the instructions on the packaging.

See also  How to Paint Cardboard? Everything you need to know

If making your own mixture, mix equal parts vinegar and water in a bowl or bucket. Use a clean cloth to wipe down the plastic, being sure to get into all the nooks and crannies. Rinse the mixture off with clean water and dry the plastic with a towel.

Protective coat

To give your ATV plastic a protective coat, you can use a mixture of olive oil and lemon juice. Simply mix equal parts olive oil and lemon juice in a bowl or bucket.

Use a clean cloth to wipe down the plastic, being sure to get into all the nooks and crannies. Allow the mixture to sit on the plastic for a few minutes before wiping it off with a clean cloth. Rinse the plastic with clean water and dry it with a towel.

How do you restore faded plastic on an ATV?

There are a few ways to restore faded plastic on an ATV. One way is to use a product called “Plasti Dip.” This product can be found at most auto stores and comes in a spray can. Plasti Dip will give the plastic a new coat that will protect it from further fading.

Another way to restore faded plastic is to use a product called ” vinyl wrap.” This product can also be found at most auto stores. Vinyl wrap comes in a sheet and can be cut to fit the plastic that needs to be restored. Once the vinyl wrap is applied, it will protect the plastic from further fading.

Additionally, there are many DIY recipes that can be found online for restoring faded plastic. One popular recipe is to mix one part white vinegar with two parts water. This mixture can then be sprayed onto the faded plastic and left to dry.

All of these products are easy to use and will restore the plastic on your ATV.

What kind of paint will stick to plastic?

Paint is a versatile medium that can be used on a variety of surfaces, including plastic. While not all paints will stick to plastic, there are speciality paints available that are designed specifically for this purpose.

Before painting any surface, it is important to properly prepare the area by cleaning it and sanding it smooth. This will help the paint to adhere better and create a more even finish. When painting plastic, it is also important to use a primer before applying the paint, as this will help the paint to better stick to the surface.

Additionally, it is important to choose the right type of paint for the project. For instance, if the plastic surface will be exposed to sunlight or weather, it is important to use a paint that is designed for outdoor use.

How can I change the color of my ATV plastic fenders?

The best way to change the color of your ATV plastic is to use a vinyl wrap. This will allow you to change the color of your plastic without having to worry about paint chipping or fading over time. Vinyl wraps are also easy to remove, so if you ever want to go back to your original color scheme, you can do so without any problem.

Another option for changing the color of your ATV plastic is to use a paint job. However, paint can chip and fade over time, so it is not the most durable option. If you decide to go with a paint job, be sure to choose a high-quality paint that will withstand the elements and wear and tear.

How do you spray paint ATV plastic fenders?

You will need to purchase a few supplies before you can get started painting your ATV plastic. You will need:

  • A can or two of high quality plastic primer
  • A can or two of high quality plastic paint
  • Some sandpaper ( grits 400, 600, 1000 )
  • Masking tape
  • Newspaper or a tarp
  • A well ventilated area to work in

The first thing you will want to do is clean the plastic surface that you will be painting. Use soapy water and a sponge to remove any dirt, debris, or grease. Once the surface is clean, dry it off with a towel.

Next, you will want to sand the surface of the plastic. Start with a lower grit sandpaper and work your way up to a higher grit. This will help to create a smooth surface for the paint to adhere to.

Once the plastic is sanded, you will want to apply a coat or two of primer. Let the primer dry completely before moving on to painting.

When the primer is dry, you can begin painting the plastic. Apply a few thin coats of paint, allowing each coat to dry completely before applying the next.

Once the paint is dry, you can remove the masking tape and newspaper or tarp. Your newly painted ATV plastic is now ready to be enjoyed!